1-21Table 1-22 Description of LPU status LEDsLED DescriptionRUN z ON/OFF: The LPU is faulty or out of position.z Blinking: The LPU is operating normally.ALM z OFF: The LPU is operational or out of position.z ON: The LPU is faulty.If the RUN LED flashes at a high frequency, the card is in the startup process, but is not yet operational.At system startup, the ALM LED will be ON for a while but it does not mean that the card is faulty.z ACTIVE LEDThe ACTIVE LED shows the active/standby status of the LSQ1MPUA0. If the ACTIVE LED is ON, theLSQ1MPUA0 is active; if OFF, the LSQ1MPUA0 is standby.RESET buttonA reset button is provided on the LSQ1MPUA0 for you to reset the card when necessary.Dedicated S7903E-S SRPU-LSQ1CGP24TSC0Applicable modelS7903E-STechnical specificationsTable 1-23 Technical specifications of the LSQ1CGP24TSC0Item SpecificationsCPU MIPS64, 400 MHzBoot ROM 512 KBFlash memory 64 MBDDR SDRAM 512 MBDimensions (H × W × D) 45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)Portsz Twenty-four 1000Base-X-SFP/100Base-FX-SFP ports,eight of which can form eight Combo ports with the eight10/100/1000Base-T GE portsz One console port, used for local or remote configurationand management of the switch through a dialupconnectionz One 10/100Base-TX port for management and upgradePower consumption 25 W to 45 WPanel and LEDsTable 1-19 shows the front panel of the LSQ1CGP24TSC0.
