Configuring IBM Host Connectivity 95n If you have copied the Microsoft 32-bit DLC protocol todiskette, insert the diskette in the drive.n If you have copied the DLC protocol to the hard drive,enter the appropriate path for the downloadedMicrosoft 32-bit DLC protocol in the Install From Diskwindow. Click OK.9 Verify that Microsoft 32-bit DLC is displayed forthe 3Com TokenLink Velocity XL PCI Adapter in theConfiguration tab of the Network window. Click OK.Windows copies the protocol files.The System SettingsChange window displays the following message:You must restart your computer before the newsettings will take effect. Do you want torestart your computer now?10 Click Yes.This completes the procedure for adding the Microsoft32-bit DLC network protocol to the Windows 95 NetworkProtocols list for the 3C359B NIC.After adding the network protocol, install the hostconnectivity applications (such as client access andemulator applications) that are appropriate for yourenvironment.Adding the 32-Bit DLC Network Protocol for Windows NTFollow the steps in this section to add the Microsoft32-bit DLC network protocol to the Windows NT NetworkProtocols list for the 3C359B NIC. The 32-bit DLC protocolis required for connectivity between your PC and an IBMhost computer.1 On the Windows NT desktop, double-click theMy Computer icon.2 Double-click the Control Panel icon.3 Double-click the Network icon.4 In the Network window, select the Protocols tab.Click Add.5 In the Select Network Protocol window, select DLCProtocol. Click OK.
