3Com VCX V7000 Installation And Maintenance Manual

Also see for VCX V7000: Telephone guide User guide Telephone guide Telephone guide Manager's guide

Contents

3Com VCX V7000 Installation And Maintenance Manual Manual pdf 77 page image

Installation Scripts 77Sample UMSInstallation Script(Primary UMS Server)After the network installation script has been completed, the UMSinstallation script starts. The sample script shown next provides guidanceon how to answer the questions.UMS Installation Script — Primary UMS Server------------------------------------------------------------------------------------------------- Initial VCX Configuration -----------------------------------------------------------------------------------------------------One or more VCX components in the currently selected VCX version requireinitial configuration. This configuration must be completed before anyVCX services can be started.Do you wish to configure VCX at this time?If you say no, VCX services will not be started, and you will be promptedagain to do this configuration when you reboot.Configure VCX now? [yes] :Press the Enter or Return key to accept yes as the suggested answer.Beginning initial VCX configuration.Configuring VCX Tomcat ServerType of VCX 7300 Installation (S-Standalone/C-Client/V-Server)? [S]SPress the Enter or Return key to accept S as the suggested answer.Number of voip ports? [144]Press the Enter or Return key to accept the default number (144) of VOIPports that the system will support. Do not enter a different value withoutconsulting 3Com.IP address of the outbound proxy? [0.0.0.0] 10.20.30.40In previous releases of the VCX software the Call Processor was referredto as the Call Proxy or Outbound Proxy. Enter the IP address of thesecondary VCX Call Processor.Name of the SIP DDD? [10.20.30.40]The SIP Default Dialing Domain software runs on the same server as theVCX Call Processor. Press the Enter or Return key to accept the IP addressof the primary VCX Call Processor.TCP/UDP Port on which the VCX 7300 will receive SIP messages [5060]The VCX Call Processor and UMS both use the same port number but ondifferent IP addresses. Press the Enter or Return key to accept the defaultport, 5060.