Displaying QoS Information 347Configuration information for some settings appears in other chapters. Toconfigure transmit rates, or the long or short retry, see “Configuring aService Profile” on page 233. To configure the user-idle timeout andidle-client probing, see “Displaying and Changing Network SessionTimers” on page 565.(For more information about this command’s output, see the “MAPCommands” chapter in the Wireless LAN Switch and ControllerConfiguration Guide.)Displaying CAC Session InformationTo display current CAC session counts on all MAPs using a specifiedservice profile, when session-based CAC is enabled, use the followingcommand:display service-profile name cac sessionThe following example displays information about CAC session counts forservice profile sp1:WX# display service-profile sp1 cac sessionService Profile sp1CAC Mode SESSIONMax Sessions 14(For more information about this command’s output, see the “MAPCommands” chapter in the Wireless LAN Switch and ControllerConfiguration Guide)Displaying CoSMappingsMSS provides commands for displaying the default CoS mappings andconfigured mappings.Displaying the Default CoS MappingsTo display the default CoS mappings, use the following command:WX1200# display qos defaultIngress QoS Classification Map (dscp-to-cos)Ingress DSCP CoS Level===============================================================================00-09 0 0 0 0 0 0 0 0 1 110-19 1 1 1 1 1 1 2 2 2 220-29 2 2 2 2 3 3 3 3 3 330-39 3 3 4 4 4 4 4 4 4 4
