42 CHAPTER 3: S YSTEM SERVICE COMMANDSclear system Clears the system configuration of the specified information.CAUTION: If you change the IP address, any currently configuredMobility Domain operations cease. You must reset the Mobility Domain.Syntax — clear system [contact | countrycode | idle-timeout| ip-address | location | name] contact — Resets the name of contact person for the WX switch tonull. countrycode — Resets the country code for the WX switch to null. idle-timeout — Resets the number of seconds a CLI managementsession can remain idle to the default value (3600 seconds). ip-address — Resets the IP address of the WX switch to null. location — Resets the location of the WX switch to null. name — Resets the name of the WX switch to the default systemname, which is the model number.Defaults — None.Access — Enabled.History — —Introduced in MSS Version 3.0. Option idle-timeout addedin MSS Version 4.1.Examples — To clear the location of the WX switch, type the followingcommand:WX4400# clear system locationsuccess: change accepted.See Also display config on page 623 display system on page 45 set system contact on page 57 set system countrycode on page 58 set system idle-timeout on page 62 set system idle-timeout on page 62 set system location on page 64
