3Com WX4400 Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Command reference Configuration guide Installation and Basic Configuration Guide

Contents

set igmp 477See Also clear igmp statistics on page 466set igmp Disables or reenables IGMP snooping on one VLAN or all VLANs on awireless LAN switch.Syntax — set igmp {enable | disable} [vlan vlan-id] enable — Enables IGMP snooping. disable — Disables IGMP snooping. vlan vlan-id — VLAN name or number. If you do not specify aVLAN, IGMP snooping is disabled or reenabled on all VLANs.History — Introduced in MSS Version 3.0.Examples — The following command disables IGMP snooping on VLANorange:WX1200# set igmp disable vlan orangesuccess: change acceptedSee Also set igmp rv on page 486TopologynotificationsNumber of Layer 2 topology change notifications received by theWX.In the current software version, the value in this field is always 0.Packets withunknownIGMP typeNumber of multicast packets received with an unrecognizedmulticast type.Packets withbad lengthNumber of packets with an invalid length.Packets withbad IGMPchecksumNumber of packets with an invalid IGMP checksum value.PacketsdroppedNumber of multicast packets dropped by the WX.Table 79 Output of display igmp statistics (continued)Field Description