3ware Escalade ATA RAID Controller User Guide118 www.3ware.com6 The final upgrade driver screen should appear (Figure 46), fol-lowed by a progress bar which appears briefly, then by a SystemSettings Change dialog.Figure 46. Final driver installation screenRemove the existing Escalade ATA RAID Controller andinstall the new Escalade ATA RAID ControllerRefer to the Hardware Installation chapter.Reboot the machine1 Remove the driver diskette from your PC, then install the newATA RAID controller. Afterwards, turn your system on.2 If you choose to reconfigure your disk arrays press Alt-3 tobring up the Disk Array Configuration Utility.
