Windows® 98/ME Installationwww.3ware.com 85Installing the ATA RAID controller whileinstalling Windows 98/MEMaterials required:• 3ware CD-ROM(You will be required to create a 3ware Windows Driver Installa-tion Diskette from the files located on the 3ware CD-ROM.Please refer to the "Readme.txt" file on the 3ware CD-ROM fordirections.)Create disk arraysRefer to the 3ware Hardware Installation and 3ware Disk ArrayConfiguration Utility chapters.Boot the system from the Windows 98/ME diskette1 Insert Windows 98/ME boot disk into the floppy drive.2 Restart your computer.3 From the Windows 98 or ME Startup Menu, choose 1. Startcomputer with CD-ROM support.Partition the boot device using fdisk1 If your disks have not been partitioned you will get a messagelike “Windows has detected that drive C does not contain a validFAT or FAT32 partition”. From the MS-DOS command prompt,run fdisk to create a partition.A:\> fdisk2 When asked to enable large disk support indicate “yes” by typ-ing Y.3 Under FDISK Options select option 1, Create a DOS partitionor Logical DOS Drive.4 Under Create a DOS Partition or Logical DOS Drive selectoption 1, Create a Primary DOS partition.
