3ware Escalade ATA RAID Controller User Guide142 www.3ware.comCompiling the Driver (For experts only)If you wish to compile the driver yourself (for a different kernelversion that you are running), then perform the following steps.1 Copy the driver source from the floppy into a working directory.2 Untar the driver source with the command, tar zxfp 3w-xxxx.tgz.3 You must have a full Linux kernel source tree in/usr/src/linux in order to do the compile.4 To build UP module boot to desired UP kernel, type:make -f makefile.othThe created file is 3w-xxxx.o5 To build SMP module boot to desired SMP kernel, type:make smp -f makefile.othThe created file is 3w-xxxx.smp6 Copy the module to the scsi directory.For 2.4 kernels, copy module to:/lib/modules/***kernel string***/kernel/drivers/scsi/3w-xxxx.oInstall and run 3DM disk management utilityRefer to the 3DM Disk Management Utility chapter. If you areusing the 3ware Command Line Interface, refer to the 3ware CLIUser Guide.
