Updating the Driver and Firmwarewww.3ware.com 1957 If a dialog box prompts you to restart your computer, click Yes to do so.(If you were working from a driver diskette, be sure to remove the floppydiskette before Windows reboots.)8 If the driver you are installing is unsigned, you will receive a message tothat effect.To complete the installation with an unsigned driver, click OK.9 If a final message box confirms that the process is complete, click OK.(This message appears if you do not need to restart your computer.)Using the Update Utility With Multiple ControllersWhen your system has multiple 3ware RAID controllers installed, the updateutility lets you update the firmware on any or all of the installed controllers.To update the firmware on multiple controllers1 Follow steps 1 through 5 above, under “Updating the 3ware Driver andFirmware Under Windows” on page 191.
