Starting 3DM and Logging Inwww.3ware.com 73Starting 3DM and Logging In3DM runs as a service under Windows, and as a daemon under Linux.It is a good idea to leave 3DM running on the system that contains your 3wareRAID controller. That way email alerts can be sent by 3DM, andadministrators can manage the controller remotely, if remote administration isenabled.You can access the 3DM screens to check status information and manage your3ware RAID controller by logging in to the 3DM screens in your browser.Starting 3DM under Linux3DM should start automatically after installation and upon bootup.To start 3DM manually1 Login as root.2 Afterwards, type:/etc/init.d/3dm2 start3 Open your browser and enter the URL for your system.For 32-bit versions of Linux, use https://localhost:888/For 64-bit versions of Linux, use: http://localhost:888/You can also replace “localhost” with the IP address of the computer thatcontains the 3ware controller. For example: https://:888/Note: If you are using a 64-bit version of Linux, use “http://”instead of “https://”.The 3DM login screen appears.Starting 3DM under Microsoft Windows From the Start menu, choose Programs > 3ware > 3DM 2.Your default browser opens and displays the URL for your localcontroller.The default URL is https://localhost:888/.You can also replace “localhost” with the IP address of the computer thatcontains the 3ware controller. For example: https://:888/Note: If you close your browser, 3DM continues to run in thebackground on the system.
