AAton CANTAR X3 User Manual
                                                                                     | |
Contents
| 
LINE OUTPUTSCantar X3 has 8 Line outputs.I. OutmapsYou can configure up to 26 Outmaps (from 'a' to 'z') each applicable to one or several outputs.NB: Line and AES Outmaps are shared. (Line Outmap 'a' is the same as AES Outmap 'a').Outmaps can be modified while the Main Selector is in the 6 o'clock position.In that position, Headphone Outmaps are displayed but by pressing the F3 button, you willaccess the Line Outmaps panel (pressing the F3 button again will display the AES Outmappanel).Pict. 06Pict. 10Pict. 11Each row represents a Line Output. On a row, five parameters may be setup:• the Attenuation Level.• the Delay applied to the Output.• the Play-Mute option.• the Beep Mute option.• the current outmap configuration of the Output.In Pict 07: Line Out 1 has the Outmap 'a' which is named « T1 ».Track 1 is sent to Line Out 1.You can select a row by using the Up and Down buttons. Using the Left and Right buttons or theJog wheel enables to select among the 5 parameters.Once a row is selected, the corresponding Outmap is applied on the Headphone ouput.Cantar X310 |
Related manuals for AAton CANTAR X3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine