AAton CANTAR X3 User Manual
                                                                                     | |
Contents
| 
4. Beep MuteBeeps (record beeps, warning beeps) may be muted on each output.Using the Left and Right buttons or the Jog wheel, move the light blue selection box to the fourthitem of the wanted row and press the OK button to modify the value.If the Beep symbol is crossed, beeps won't be routed to the outputIn Pict 07, Beeps are enabled for outputs 2 & 3 only.5. Current ConfigurationYou can change the Outmap applied to an Output by selecting its row and then turning the LeftCrown. Letter, name and Outmap settings are updated.A special Outmap is placed before the 'a' outmap: the Muted outmap where no input is routed.It is also possible to select an Outmap using the Left and Right buttons or the Jog wheel, in orderto move the light blue selection box to the fifth item of the wanted row and press the OK buttonto display the Outmap selection window.Pict. 14Using the Up and Down buttons, select the wanted Outmap and apply it by pressing the Okbutton. It is also possible to edit the currently selected Outmap by pressing the F5 button.6. Edit OutmapPress the F5 button to open the Configuration Edit window.Pict. 15WARNING: Keep in mind that the configuration you are modifying can be applied to multipleoutputs. Even more, as the Outmaps are shared between AES and Line Outputs it can alsomodify an AES Output.In Pict 08, Outmap 'a' is applied to Lineout 1 but also to AES-Out 1 to 8 as statedby the warning text at the left of the window.Cantar X312 |
Related manuals for AAton CANTAR X3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine