AAton CANTAR X3 User Manual
                                                                                     | |
Contents
| 
NB: Copy and Paste.By pressing the F1 button, the current Digital Filters setup is copied to the clipboard.Paste it over any Digital Filters setup by pressing the F2 button.2. LineThe solo of a Line input is obtained by pressing the Solo button of the actuator assigned to theinput, or it has no actuator assigned, by pressing the Solo button on the Right side of the Cantar.Pict. 37i. AttenuationIf a Line input is not assigned to an actuator (Mixer or Cantarem or Cantarem2 slider), itsattenuation can be changed during Solo by rotating the Jog wheel.ii. AttenuatorToggle between High Level & Low Level with the Shift + Up or Down buttons.Low Level: default for all line inputs.High Level: a 20dBu attenuator is applied.iii. FilterChange Filter with the Up or Down buttons between Neutral, 60Hz/–6dB and 60Hz/–12dB.iv. Other parametersPlease refer to the Solo-Mic section.3. TrackThe solo of a Track is obtained by pressing the Solo button of the actuator assigned to the track,or if the input has no actuator assigned, by opening the Track-Solo panel for any Track and thenrotating the Left Crown to get to the desired Track Number.Pict. 38i. Status (Arm/Disarm Track)While being in Solo-Track, pressing the F3 button arms or dis-arms a Track.Monophonic multi-track file recording doesn't waste disk space by recording empty Tracks as it isCantar X328 |
Related manuals for AAton CANTAR X3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine