AAton CANTAR X3 User Manual
                                                                                     | |
Contents
| 
Pict. 873. User OutmapsIn this mode, all Tracks routed into the current User defined Outmap are sent to the headphones.Tracks will be routed according to the Outmap. Tracks are played Post-Play-Fader, meaning youcan change the playback Track Level, using the actuator assigned to the Track in order to modifythe attenuation.Pict. 88NB: • On top of the Vumeters is displayed Track's attenuation.• If no actuator is assigned to a played Track, its attenuation can still be changed bySolo-ing the Track (Solo of any Track, then rotate the Left Crown to access the desiredTrack) and then while holding the Shift button press, rotate the Jog wheel.This mode is symbolized on the Headphone Outmap grid by playback Tracks being active, atthe side designated in the Outmap. Tracks are labelled according to the chosen monitoringmode: “P” to emphasize the PostFader property or “T” for PreFader mode.NB: Only Tracks can be activated, other inputs than tracks are marked inactive, except forMixdown: if a Mixdown type input is routed on the Outmap, then the Cantar will automaticallyplay the first track corresponding to the routed Mix input.Pict. 894. SoloSolo of one or multiple tracks is available. Track(s) is(are) played Mono (to both left and rightears), Pre-Fader (Track level as it was recorded).The timeline displays only the waveform(s) corresponding to the selected Track(s).Cantar X349 |
Related manuals for AAton CANTAR X3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine