AAton CANTAR X3 User Manual
                                                                                     | |
Contents
| 
TESTTest is at the 10 o'clock position.This menu enables to: set up each input's parameters (Phantom Power, Phase Inversion, Filter).All analog inputs can be powered 'ON': unused inputs powered 'OFF' are powered during aSolo (in contrast with the Pre-Record Menu where only the used inputs are powered on).I. Link InputsYou can slave one or multiple analog inputs to a master by declaring a Link group.A total of 6 Link groups can be declared, 4 for the Mics and 2 for the Lines.Each group as a master:Group-1: Mic-1 master; Group-2: Mic-3; Group-3: Mic-5; Group-4: Mic-7.Group-5: Line-1; Group-6: Line-3.A master can be linked to the superior inputs (e.g. M-3 can be linked to M-4 to M-8).NB: • Stereo-pairs 1>2; 3> 4; 5>6; 7>8• Surround: 1>2-3-4-5• Double M/S: 1>2 & 3>4.5Phantom, Limiter and filter are applied on slaves identically to the linked master.Phase inverters remain independent.For a stereo pair, slaved input is the balance. Before its actuator middle-point (potentiometer,fader, cantarem) the slave's level is attenuated, after the middle-point, the master's level isattenuated.If there is more than one slave, the slave's actuator position determines the ±12dB gain appliedfrom it's master value.To display the Link Panel, press the F5 button.Pict. 71Pict. 72The group is selected with Left and Right buttons. Editing is enabled through the OK button.Cantar X342 |
Related manuals for AAton CANTAR X3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine