Operational Precautions and Limitations4500 Series of Instruments System User Guide10 of 138 RUO-IDV-05-0264-ARegulatory ComplianceThis system complies with the standards and regulations listed in this section. Applicable labelshave been affixed to the system.Australia and New Zealand• Electromagnetic Interference—AS/NZ CISPR 11 (Class A)• Safety—AS/NZ 61010-1Canada• Electromagnetic Interference—CAN/CSA CISPR11. This ISM device complieswith Canadian ICES-001.• Safety—CAN/CSA C22.2 No. 61010-1, and CAN/CSA C22.2 No. 61010-2-061Europe• Electromagnetic Compatibility—Electromagnetic Compatibility Directive2004/108/EC, as implemented in these standards:• EN 55011 (Class A)• EN 61326-1• Safety—Low Voltage Directives 2006/95/EC as implemented in these standards:• EN 61010-1• EN 61010-2-061• WEEE—Waste, Electrical, and Electronic Equipment Directive 2002/96/EECUnited States• Electromagnetic Interference, FCC Part 15, Class A—This equipment has beentested and found to comply with the limits for a Class A digital device, pursuant toPart 15 of the FCC (Federal Communications Commission) Compliance Rules.These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the operator’s manual, can cause harmfulinterference to radio communications.Operation of this equipment in a residential area is likely to cause harmfulinterference in which case you will be required to correct the interference, at yourown expense. Changes or modifications not expressly approved by themanufacturer could void your authority to operate the equipment.• Safety—UL 61010-1, IEC 61010-2-061
