Start-up 999Start-upContents of this chapterThis chapter describes the start-up procedure of the drive.Start-up procedure1. Only qualified electricians are allowed to start-up the drive.2. Make sure that the installation of the drive module has been checked according to thechecklist in chapter Installation checklist, and that the motor and driven equipment areready for start.3. Perform the start-up tasks instructed by the cabinet-installer of the drive module.4. Switch the power on, setup the drive control program, and perform the first start of thedrive and motor. See the ACS580-04 quick installation and start-up guide(3AXD50000015469 [English]) or ACS580 firmware manual (3AXD50000016097[English]). If you need more information on the use of the control panel, see ACS-AP-xAssistant control panels user's manual (3AUA0000085685 [English]).For drive modules in which the Safe torque off function is in use: Test and validate theoperation of the Safe torque off function. See section Start-up including acceptance test onpage 142.
