184 Parameters1919 Operation mode Selection of local and external control location sources andoperating modes.See also section Operating modes of the drive (page 89).19.01 Actual operationmodeDisplays the operating mode currently used.See parameters 19.11…19.14.This parameter is read-only.-Zero None. 1Speed Speed control (in vector motor control mode). 2Torque Torque control (in vector motor control mode). 3Min The torque selector is comparing the output of the speedcontroller (25.01 Torque reference speed control) and torquereference (26.74 Torque ref ramp out) and the smaller of thetwo is used (in vector motor control mode).4Max The torque selector is comparing the output of the speedcontroller (25.01 Torque reference speed control) and torquereference (26.74 Torque ref ramp out) and the greater of thetwo is used (in vector motor control mode).5Add The speed controller output is added to the torque reference(in vector motor control mode).6Reserved 7…9Scalar (Hz) Frequency control in scalar motor control mode (in scalarmotor control mode).10Forced magn. Motor is in magnetizing mode. 2019.11 Ext1/Ext2 selection Selects the source for external control location EXT1/EXT2selection.0 = EXT11 = EXT2EXT1EXT1 EXT1 (permanently selected). 0EXT2 EXT2 (permanently selected). 1FBA A MCW bit 11 Control word bit 11 received through fieldbus interface A. 2DI1 Digital input DI1 (10.02 DI delayed status, bit 0). 3DI2 Digital input DI2 (10.02 DI delayed status, bit 1). 4DI3 Digital input DI3 (10.02 DI delayed status, bit 2). 5DI4 Digital input DI4 (10.02 DI delayed status, bit 3). 6DI5 Digital input DI5 (10.02 DI delayed status, bit 4). 7DI6 Digital input DI6 (10.02 DI delayed status, bit 5). 8Reserved 9…18Timed function 1 Bit 0 of 34.01 Timed functions status (see page 255). 19Timed function 2 Bit 1 of 34.01 Timed functions status (see page 255). 20Timed function 3 Bit 2 of 34.01 Timed functions status (see page 255). 21Reserved 22…24Supervision 1 Bit 0 of 32.01 Supervision status (see page 248). 25Supervision 2 Bit 1 of 32.01 Supervision status (see page 248). 26Supervision 3 Bit 2 of 32.01 Supervision status (see page 248). 27Reserved 28…31No. Name/Value Description Def/FbEq16
