76 Program features TimersIt is possible to define four different daily or weekly time periods. The time periods canbe used to control four different timers. The on/off statuses of the four timers areindicated by bits 0…3 of parameter 06.14 Timed func stat, from where the signal canbe connected to any parameter with a bit pointer setting (see page 102). In addition,bit 4 of parameter 06.14 is on if any one of the four timers is on.Each time period can be assigned to multiple timers; likewise, a timer can becontrolled by multiple time periods.The figure below presents how different time periods are active in daily and weeklymodes.MondayTuesdayWednesdayThursdayFridaySaturdaySundayMondayTuesdayWednesdayTime period 1: Start time 00:00:00; Stop time 00:00:00 or 24:00:00; Start on Tuesday; Stopday SundayTime period 2: Start time 03:00:00; Stop time 23:00:00; Start day Wednesday; Stop dayWednesdayTime period 3: Start time 21:00:00; Stop time 03:00:00; Start day Tuesday; Stop day SaturdayTime period 4: Start time 12:00:00; Stop time 00:00:00 or 24:00:00; Start day Thursday; Stopday TuesdayThursdayTime period 1(weekly)Time period 4(daily)Time period 4(weekly)Time period 1(daily)Time period 2(weekly)Time period 2(daily)Time period 3(weekly)Time period 3(daily)
