Mechanical installation 51 Fastening methodsFasten the cabinet to the floor by using the clamps included along the edge of the cabinetbottom, or by bolting the cabinet to the floor through the holes inside (if they areaccessible). Alternative 1 – Clamping Alternative 2 – Using the holes inside the cabinet1. Insert the clamps into the twin slots along the frontand rear edges of the cabinet frame body and fastenthem to the floor with a bolt. The recommendedmaximum distance between the clamps in the frontedge is 800 mm (31.5”).2. If floor mounting at the back is not possible, fasten thetop of the cabinet to the wall with L-brackets (notincluded in the delivery) bolted to the lifting barfastening holes.1. Fasten the cabinet to the floor through the bottomfastening holes with M10 to M12 (3/8” to 1/2”) bolts.The recommended maximum distance between thefront edge fastening points is 800 mm (31.5”).2. If the back fastening holes are not accessible, fastenthe cabinet at the top to wall with L-brackets (notincluded in the delivery) using the lifting bar fasteningholes.1Clamp dimensionsM16M16
