Mechanical installation 65Fastening the cabinet to the floor and wall or roof (marineunits)Obey the general rules given in section General rules on page 63.See the dimension drawing delivered with the drive for the locations of the fastening holesin the flat bars below the cabinet and for fastening points at the top of the cabinet. Topfastening brackets are included in the delivery.Fasten the cabinet to the floor and roof (wall) as follows:1. Bolt the unit to the floor through the holes in each flat bar at the base of the cabinetusing M10 or M12 screws.2. If there is not enough room behind the cabinet for installation, clamp the rear ends ofthe flat bars to the floor.3. Remove the lifting eyes and bolt the fastening brackets into the lifting eye holes.Fasten the top of the cabinet to the rear wall and/or roof with brackets.M162. Clamping the cabinet to thefloor at the backa Clampb Back panel of cabinetc Flat bars at base of cabinet3. Fastening the cabinet at thetopd Fastening bracketa bc2 3 d
