ABB ARM600 User Manual
Also see for ARM600: Quick start guideProduct guide
                                                                        | |
Contents
| 
Section 4 Getting started4.1 Configuring ARM600ARM600 is delivered with factory pre-installed software. As the configuration isperformed with a Web browser, no additional software is needed. Follow therecommended configuration order.Do not use any install media possibly delivered with the server.1. Rack mount ARM600.2. Connect the cables.3. Log in to ARM600 using the WHMI.4. Enable and configure the eth1 interface.5. Configure the eth0 interface.6. Configure the VPN, firewall and time settings.4.2 Rack mounting ARM600• To install ARM600 to 19” computer rack, follow the instructions provided withthe ARM600 server.Some racks require specific mounting kits and power cords. See therack’s documentation for details.4.3 Connecting cables1. Verify that the available AC operating voltage complies with the hardwarespecifications.2. Insert the AC power cord to ARM600 and connect the other end to the AC socketor rack’s power rail.3. Insert the Ethernet cables.1MRS758861 A Section 4Getting startedARM600 17User Manual |
Related manuals for ABB ARM600
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine