ABB ARM600 User Manual

Also see for ARM600: Quick start guide Product guide

Contents

ABB ARM600 User Manual Manual pdf 45 page image

Section 7 Arctic Patrol7.1 OverviewThe Arctic Patrol application runs on ARM600 and provides a Web-based HMIinterface. The Arctic Patrol application is used for condition monitoring andcentralized management of field devices. The centralized management enables, forexample, remote updating of the Arctic wireless devices’ firmware in larger batchesas opposed to device-by-device. The asset management in Patrol is a feature of theABB Arctic product line, but it also supports other ABB products that have beenconnected to a remote Arctic wireless device.The available actions shown in Arctic Patrol depend on the features and devices thatthe Arctic wireless devices have reported. The Arctic wireless devices’ local networkis scanned for supported ABB products only, if the feature has been enabled in theArctic wireless device.7.2 Registering Arctic devices to PatrolThe registration page in Arctic Patrol allows creating a configuration that can beimported into an Arctic device during the configuration phase.1. Log in to ARM600's WHMI as the arctic-adm user.2. On the left pane under the Arctic Patrol menu, select Registration.3. Select the Patrol protocol to be used.The Patrol main functionality is the same regardless of the chosencommunication protocol. The SSH protocol is selected as an example in thisinstruction.• SSH• HTTPSThe border firewall must allow the use of TCP 22 (default) orTCP 10000 port in order to get the Patrol working.1MRS758861 A Section 7Arctic PatrolARM600 31User Manual