Wiring with the logic relay1481SVC 440 795 M0100Timing relays The logic relay provides 16 timing relays from T 1 to T 16.A timing relay is used to change the switching duration andthe make and break times of a switching contact. The delaytimes can be configured between 2 ms and 99 h 59 min. Youcan use positive values, values of analog inputs, actualvalues of counter relays and timing relays.You can also use the logic relay as a multi-function relay inthe application. The logic relay is more flexible than anyhardwired timing relay since you can wire all the functions atthe push of a button as well as program additional functions.You integrate a timing relay into your circuit in the form of acontact and coil.h The timing relays of CL-LSR/CL-LST and CL-LMR/CL-LMTfunction in the same way as the timing relays of theAC010 devices.Exception: The “flasher” function starts on the CL-LSR/CL-LST and CL-LMR/CL-LMT with the pulse. With theAC010, the “flasher” function starts with the pause. Ifrequired, the same timing relays can also be used forretentive data.I1-I4----TT1T1-------ÄQ3 Contact CoilT1 to T16 Contact of a timing relayTT1 to TT16 Enable, timing relay triggerRT1 to RT16 reset coil of the timing relayHT1 to HT16 stop coil of the timing relay(H = Stop , S means the set coilfunction)h To prevent unpredictable switching states, use each coil ofa relay once only in the circuit diagram.
