Activating and deactivatingthe P buttons2151SVC 440 795 M0100Activating debounce (input delay)A tick å next to DEBOUNCE indicates that this functionis activated.If this is not so, proceed as follows:X Select DEBOUNCE and press OK.Debounce mode will be activated and the display will showDEBOUNCE å.Press ESC to return to the status display.Deactivating debounce (input delay)If the logic relay is showing DEBOUNCE in the display, thismeans that Debounce mode has already been deactivated.X Otherwise select DEBOUNCE å and press OK.If Debounce mode is deactivated the display will showDEBOUNCE.Activating anddeactivating the P buttonsEven though the cursor buttons (P buttons) have been set aspushbutton actuator inputs in the circuit diagram, thisfunction is not activated automatically. This prevents anyunauthorised use of the cursor buttons. The P buttons can beactivated in the system menu.DEBOUNCE åÆP BUTTONSRUN MODECARD MODE æh How the logic relay input and output signals are processedinternally is explained in section “Delay times for inputsand outputs”, from Page 230.h If the logic relay is password-protected you cannot openthe system menu until you have “unlocked” it.h Factory setting:The P buttons are not activated.
