ABB FPBA-01 User Manual
Also see for FPBA-01 PROFIBUS DP: User manualQuick installation and start-up guideQuick installation and start-up guide
                                                                                                                                            | |
Contents
| 
Safety instructions5Safety instructionsOverviewThis chapter states the general safety instructions that must befollowed when installing and operating the FPBA-01 PROFIBUSDP Adapter module.The material in this chapter must be studied before attempting anywork on, or with, the unit.In addition to the safety instructions given below, read thecomplete safety instructions of the specific drive you are workingon.General safety instructionsWARNING! All electrical installation and maintenance work on thedrive should be carried out by qualified electricians. The drive andadjoining equipment must be properly earthed.Do not attempt any work on a powered drive. After switching offthe mains, always allow the intermediate circuit capacitors 5minutes to discharge before working on the frequency converter,the motor or the motor cable. It is good practice to check (with avoltage indicating instrument) that the drive is in fact dischargedbefore beginning work.The motor cable terminals of the drive are at a dangerously highvoltage when mains power is applied, regardless of motoroperation.There can be dangerous voltages inside the drive from externalcontrol circuits even when the drive mains power is shut off.Exercise appropriate care when working on the unit. Neglectingthese instructions can cause physical injury or death. |
Related manuals for ABB FPBA-01 PROFIBUS DP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine