Master configuration51Master configurationOverviewThis chapter gives information on configuring the PROFIBUSmaster station for communication through the FPBA-01PROFIBUS Adapter module.Configuring the systemAfter the FPBA-01 PROFIBUS DP Adapter module has beenmechanically and electrically installed according to the instructionsin previous chapters, and has been initialised by the drive, themaster station must be prepared for communication with themodule.Configuration of the master station requires a type definition(GSD) file.For DP-V0 communication, the file is available fromwww.profibus.com or your local ABB representative (the filenameis ABB_0959.GSD).For DP-V1 communication, the file is available from your localABB representative (the filename is ABB10959.GSD).Please refer to the master station documentation for moreinformation.
