Displays available settable parameters which include scheme type, coordination timefor blocking coordination scheme, minimum duration of a carrier send signal andsecurity timer for loss of carrier guard detection.9.3.8.3 Phase segregated scheme communication logic for distance protectionZC1PPSCH (85)Main menu/Settings/Setting Group N/Scheme communication/ZPhSegSchComm(PSCH,85)/ZC1PSelection of scheme type and timer settings are made here.9.3.8.4 Current reversal and weak-end infeed logic for distance protectionZCRWPSCH (85)Main menu/Settings/Setting Group N/Scheme communication/ZCurrentReversalWEI(PSCH,85)/EFCADisplays available parameters for setting operating modes, pickup times, time delays,rated values etc.9.3.8.5 Current reversal and weak-end infeed logic for phase segregatedcommunication ZC1WPSCH (85)Main menu/Setting/Setting group N/Scheme communication/ZPhSegrCurrRevWEI(PSCH,85)/ZC1WIncludes operating mode, voltage and timer settings.9.3.8.6 Current reversal and weak-end infeed logic for residual overcurrentprotection ECRWPSCH (85)Main menu/Settings/Setting Group N/Scheme communication/EFCurrentReversalWEI(PSCH,85)/EFCADisplays available settable parameters including operation, rated values, time data andother related settings.9.3.8.7 Scheme communication logic for residual overcurrent protectionECPSCH (85)Main menu/Settings/Setting Group N/Scheme communication/EFSchemeCommunication(PSCH,85)/EFC1Displays setting parameters for operation, scheme type and coordination time.Section 9 1MRK506276-UUS BRead and change settings62Operator's manual
