9.3.8.8 Local acceleration logic ZCLCPLALMain menu/Settings/Setting group N/Scheme communication/LocalAccelerationLogic(PLAL)/ZCLCDisplays available settable parameters for setting OperationOn or Off, setting timedelays, enable and disable various functions.9.3.9 Secondary system supervision9.3.9.1 OverviewUnder Secondary circuit supervision there are settings for Current circuit supervisionand Fuse failure. There are five instances of Current circuit supervision withparameters for minimum operation current, rated current and operation. There are sixinstances of Fuse failure supervision parameters for setting rated current, voltage,operation mode and several other parameters.9.3.9.2 Current circuit supervision CCSRDIF (87)Main menu/Settings/Setting group N/Secondary system supervision/CurrentCircuitSupervision(RDIF,87)/CCSDisplays available instances of CCSRDIF (87) with some settings per instance. Thereare settings for operation, base current setting, blocking of function, and minimumthreshold for current differential.9.3.9.3 Fuse failure supervision SDDRFUFMain menu/Settings/Setting Group N/Secondary system supervision/FuseFailure(RFUF)/FSDDisplays available instances of SDDRFUF with several settings per instance. There areparameters for operation, various thresholds and base values.9.3.10 Control9.3.10.1 OverviewUnder Control in the Setting group N menu settings for synchronism-checkAutorecloser are available. Some instances of settings are available meaning thatthe settings for all available apparatuses can be made here. The synchronism-checksettings include the selection of busses or lines and the configuration parameters for1MRK506276-UUS B Section 9Read and change settings63Operator's manual
