ABB Relion RES670 Operator's Manual

Also see for Relion RES670: Commissioning manual Product guide Installation manual Applications manual Product guide

Contents

ABB Relion RES670 Operator's Manual Manual pdf 61 page image

11.4 View binary output values11.4.1 OverviewBinary output values show the status of each individual output in the Binary outputmodule (BOM). If the signal matrix tool is used binary outputs are depicted asvirtual outputs. Note, that only modules installed in the IED are shown in the HMI.11.4.1.1 Binary Output Module BOMMain menu/Test/Binary output values/Binary output modulesDisplays available binary output modules BOM. The status and name of eachbinary outputs that each module has are displayed here. The name of each output isuser defined string. The names of binary outputs are changed in the setting menu.11.4.1.2 Signal matrix for binary outputs SMBOMain menu/Test/Binary output values/SMT binary outputsDisplays available sets of binary output values. Each set or instance of binaryoutputs displays the status of all individual binary outputs.11.5 Function test modes11.5.1 OverviewWith the IED, in test mode the different protections (except line differentialprotection) can be individually released for test here. Events can be disabled orenabled.11.5.2 Current protectionMain menu/Test/Function test modes/Current protectionTest of phase overcurrent protection,residual overcurrent protection.11.5.3 Voltage protectionMain menu/Test/Function test modes/Voltage protectionTest of two step overvoltage, two step undervoltage and two step residualovervoltage protection.1MRK511251-UEN B Section 11Test the IED55Operator's manual