The warning icon indicates the presence of a hazard which couldresult in personal injury.The caution icon indicates important information or warning relatedto the concept discussed in the text. It might indicate the presence ofa hazard which could result in corruption of software or damage toequipment or property.The information icon alerts the reader of important facts andconditions.The tip icon indicates advice on, for example, how to design yourproject or how to use a certain function.Although warning hazards are related to personal injury, it is necessary to understandthat under certain operational conditions, operation of damaged equipment may resultin degraded process performance leading to personal injury or death. Therefore,comply fully with all warning and caution notices.1.4.2 Document conventionsA particular convention may not be used in this manual.• Abbreviations and acronyms are spelled out in the glossary. The glossary alsocontains definitions of important terms.• Push button navigation in the LHMI menu structure is presented by using thepush button icons.To navigate between the options, use and .• Menu paths are presented in bold.Select Main menu/Settings.• LHMI messages are shown in Courier font.To save the changes in nonvolatile memory, select Yes and press .• Parameter names are shown in italics.The function can be enabled and disabled with the Operation setting.• Parameter values are indicated with quotation marks.The corresponding parameter values are "On" and "Off".• Input/output messages and monitored data names are shown in Courier font.When the function starts, the START output is set to TRUE.• This document assumes that the parameter setting visibility is "Advanced".Section 1 1MRS756378 SIntroduction10 REF615Application Manual