ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 32 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 33To enter the Offset Menu, press the ENTER button for at least 3 sec-onds. In this submenu you are able to adjust the home position of thepan, tilt, shutter, color wheel, both gobo wheel’s, RGobo (Rotating)wheel, prism, R (Rotating) Prism, and focus position.Pan - Adjustment of the pan home position.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Pan” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.TILT - Adjustment of the tilt home position.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Tilt” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Color1 - Setting adjustment for color wheel 1.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Color1” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Color2 - Setting adjustment for color wheel 2.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Color2” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Gobo1 - Setting adjustment for gobo wheel 1 (glassgobo wheel).1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Gobo1” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.R-Gobo1 - Setting adjustment for the gobo wheel 1(glass gobo wheel).1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “R-Gobo1” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Vizi BSW 300 Offset MenuVizi BSW 300 Offset Menu