ADJ Vizi BSW 300 User Instructions

Also see for Vizi BSW 300: User instructions

Contents

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 35ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 34Vizi BSW 300 Offset MenuGobo2 - Setting adjustment for gobo wheel 2.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Gobo2” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Prism - Setting adjustment for the 1st prism.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Prism” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Prism2 - Setting adjustment for the 2nd prism.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Prism2” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.R-Prism - Setting adjustment for the rotating prism.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “R-Prsim” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Angle/Frost - Setting adjustment for the frost filter.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Angle/Frost” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andVizi BSW 300 Offset Menuthen press ENTER to confirm. Press the MENU button for one secondto exit.Focus - Setting adjustment for the focus.1. Press the ENTER button for at least 3 seconds, then press the UPor DOWN buttons so that “Focus” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Vizi BSW 300 Error InformationIf any of these warning’s appear and you are not certain on what formof action needs to be taken, please contact ADJ customer supportfor more information.Temp. Sense ErrorThis will appear when the temperature check board is damaged.CPU-8 Error, CPU-C Error, CPU-D ErrorThis will appear when the PC board or wires are damaged.Memory Initial FailThis will appear when the memory IC is damaged.Temperature Sense ErrorThis will appear when the temperature check board is damaged.Random Error MessagesPan Reset Error, Pan Encode Error, Tilt Reset Error, Tilt EncodeError, Shutter Reset Fail, Dimmer Reset Fail, Color Reset Fail, GoboReset Fail, R-Gobo1 Reset Fail, Gobo2 Reset Fail, Prism Reset Fail,R-Prism Reset Fail, Prism2 Reset Fail, Focus Reset Fail, Angle/FrostReset Fail.These Error messages may appear when turning on or reseting theunit. Please contact ADJ customer support.