ADJ Vizi BSW 300 User Instructions

Also see for Vizi BSW 300: User instructions

Contents

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 38 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 39Vizi BSW 300 Changing the Gobo (1st Wheel)The glass gobo’s are the only gobo’s that are interchangable in thisunit. Remember when changing these gobo’s they are glass. Pleasedo this process gently so you do not break the gobo. Note: There isone metal gobo in this wheel which is also interchangable.Caution! Never open the unit when in use. Always disconnect themain power before attempting to change the gobos.Locating the Gobo wheel: After disconnecting the main power, posi-tion the head with the lens facing forward. Look through lens of theunit. When looking through the front lens, position the head so thatthe gears are on the right side. When the gears are on the right side,the shell that needs to be uscrewed is now facing up.1. To change a gobo, uscrew the 4 screws that secure the shell to theunit. The shell is attached to the unit by a safety wire, gently lift theshell off of the unit.2. When you remove the shell you will be able to access the gobowheel. Turn the wheel with your hand until you come across thegobo you would like to change.3. You have to remove the individual gobo frames. Gently push thegobo frame (Not the wheel) away from the gobo wheel, you do nothave to the push the gobo frame to far. While you are pushing thegobo frame away from the wheel, pull the the gobo frame up andout.4. Once the gobo frame has been removed, you will notice that hightemperature silicon is applied to the retainer ring. Using a small flathead screw driver, very gently scrape away the silicon to releasethe retainer ring. After the retainer ring is removed, remove thegobo.5. Change the gobo and replace the retainer ring. Reapply high tem-perature silicon or high temperature gasket sealer to the sameareas on the retainer ring.6. Insert the gobo frame back into the unit, positioning it in same wayas the other gobo frames.7. Reassemble the unit.Vizi BSW 300 CleaningFixture Cleaning: Due to fog residue, smoke, and dust cleaningthe internal and external optical lenses and mirror should be carriedout periodically to optimize light output. Cleaning frequency dependson the environment in which the fixture operates (I.e. smoke, fogresidue, dust, dew). In heavy club use we recommend cleaning on amonthly basis. Periodic cleaning will ensure longevity, and crisp out-put.1. Use normal glass cleaner and a soft cloth to wipe down the out-side casing.2. Use a brush to wipe down the cooling vents and fan grill.3. Clean the external optics with glass cleaner and a soft cloth every20 days.4. Clean the internal optics with glass cleaner and a soft cloth every30-60 days.5. Always be sure to dry all parts completely before plugging the unitback in.Vizi BSW 300 Fuse ReplacementDisconnect the unit from its power source. The fuse holder is locatednext to the powerCON connection. Using a Phillips head screw driverunscrew the fuse holder. Remove the bad fuse and replace with a new10A fuse.With this feature you can connect the fixtures to one anotherusing the PowerCON input and output sockets. The quantity thatcan be connected is 4 fixtures maximum @ 110V and a maximum8 fixture’s @ 240V. After maximum limit has been reached you willneed to use a new power outlet. They must be the same fixtures.DO NOT mix fixtures.Vizi BSW 300 Power Cord Daisy Chain

/ 22

Related manuals for ADJ Vizi BSW 300