ADJ Vizi BSW 300 User Instructions

Also see for Vizi BSW 300: User instructions

Contents

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 8 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 9Screw one clamp each via a M12 screw and nut into theOmega holders. Insert the quick-lock fasteners of the Omegaholder’s into the respective holes on the bottom of the Vizi BSW300. Tighten the quick-lock fasteners fully clockwise. Install thesecond Omega holder. Pull the safety-cable through the open-ings located on the base plate and over the trussing system ora safe fixation spot. Insert the end in the carabine and tightenthe safety screw.Vizi BSW 300 MountingNOTICE: The suitable enviromental temperature for this light-ing fixture is between -25˚ C to 45˚ C. Do not place this lightingfixture in an enviroment where the temperatures are under orabove the temperatures stated above. This will allow the fixtureto run at its best and help prolong the fixture life.Vizi BSW 300 CAD Drawing478.7mm/18.85”424.9mm/16.72”370mm/14.55”126.6mm/5”331.7mm/13”325.5mm/12.80”376.3mm/14.80”162.1mm/6.40”545.1mm/21.50”221.2mm/8.70”119.9mm/4.70”