NetVanta 6310/6330 Series Hardware Installation Guide Physical Description61700100G1-34F Copyright © 2013 ADTRAN, Inc. 17NetVanta 6310 Rear Panel DesignThe NetVanta 6310 rear panel is shown below.Figure 2. NetVanta 6310 Rear Panel LayoutNetVanta 6310 Rear Panel InterfacesNIM2/VIM2 Option SlotsThe two NIM2/VIM2 option slots (labeled SLOT 1 and SLOT 2) accept a variety of NIM2/VIM2option modules (refer to Option Modules on page 23).PRI InterfaceThe PRI interface (labeled PRI 0/1) provides a single PRA/PRI/E1/T1 interface. See Table A-3 on page43 for the PRI interface pinouts.10/100Base-T Ethernet InterfacesThe Ethernet ports (ETH 0/1 and ETH 0/2) are RJ-45 connectors. See Table A-2 on page 43 for theEthernet interface pinouts. The Ethernet ports provide the following:• 10Base-T or 100Base-T with a single connector• Auto negotiation• CSMA/CD• IEEE 802.3 compatibilityCONSOLE InterfaceThe CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management andconfiguration (via a DB-9 female connector). See Table A-1 on page 43 for the CONSOLE interfacepinouts.Power ConnectionThe rear panel has a power input to the AC universal power supply. Please refer to Supplying Power tothe Unit on page 40 for connection details.Connection directly to an external modem requires a cross-over cable.SHDSL EFM ANNEX BPRI 0/1SLOT 2SLOT 1ETH 0/1 100-240 VAC50/60 HzETH 0/2