ADTRAN 6310 Installation Manual

Also see for NetVanta 6310: Quick reference guide

Contents

NetVanta 6310/6330 Series Hardware Installation Guide Physical Description61700100G1-34F Copyright © 2013 ADTRAN, Inc. 1910/100Base-T Ethernet InterfacesThe Ethernet ports (ETH 0/1 and ETH 0/2) are RJ-45 connectors. See Table A-2 on page 43 for theEthernet interface pinouts. The Ethernet ports provide the following:• 10Base-T or 100Base-T with a single connector• Auto negotiation• CSMA/CD• IEEE 802.3 compatibilityCONSOLE InterfaceThe CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management andconfiguration (via a DB-9 female connector). See Table A-1 on page 43 for the CONSOLE interfacepinouts.Power ConnectionThe rear panel has a power input to the AC universal power supply. Please refer to Supplying Power tothe Unit on page 40 for connection details.NetVanta 6310/6330 Series Front Panel LEDsTable 1 describes the front panel LEDs.Connection directly to an external modem requires a cross-over cable.Table 1. NetVanta 6310/6330 Series Front Panel LEDsLED Color IndicationSTATUS Off Unit is not receiving power.Green (flashing) On power up, the STATUS LED flashes rapidly for fiveseconds, during which time the user may escape to bootmode from the CONSOLE port.Green (solid) Power is on and unit is functioning normally.Red (solid) Power is on, but the self-test failed.PRI (6310) Off Interface is administratively disabled.Green (solid) Interface is enabled and has a connection.Amber (solid) Interface is in test mode.Red (solid) An alarm condition is occurring on the interface.FXO/FXS (6330 Series) Off All ports are inactive or administratively disabled.Green (solid) At least one port is off-hook.Green (flashing) At least one port is ringing.Amber (solid) Port is in test mode.Red (solid) Fault condition is occurring on the interface.