Settings menuIndicator of the settingmenuDescription Value to setSET1 SET+GO ON / OFFSET2 RESIDUAL HEAT INDI-CATORON / OFFSET31) KEY TONE CLICK / BEEP / OFFSET4 FAULTY TONE ON / OFFSET5 SERVICE MENU ON / OFFSET6 RESTORE SETTINGS YES / NO1) It is not possible to deactivate the tone of the ON / OFF sensor field.You can set the settings menuonly when the appliance is off.Activate the Settings menu:1. If necessary, deactivate the appli-ance .2. Touch and hold for three sec-onds.The display shows "SET1" and "1"flashes.3. Touch / to set the setting.4. Touch .5. Touch / to change the valueof the setting.6. Touch .10.5 Automatic switch-offFor safety reasons the appliance deacti-vates automatically after some time:• if an oven function operates.• if you do not change the oven temper-ature.Temperature Switch-off time30 °C - 115 °C 12.5 h120 °C - 195 °C 8.5 h200 °C - 245 °C 5.5 h250 °C - maximum °C 3.0 hAfter the Automatic switch-off, touch asensor field to operate the applianceagain.The Automatic switch-off workswith all oven functions, apartfrom Slow Cook, Core tempera-ture sensor, Duration, End, Timedelay.10.6 Brightness of the displayThere are two modes of displaybrightness:• Night brightness - when the applianceis deactivated, the brightness of thedisplay is lower between 10 PM and 6AM.• Day brightness:– When the appliance is activated.– If you touch a sensor field duringthe night brightness (apart fromON / OFF), the display goes back tothe day brightness mode for thenext 10 seconds.– If the appliance is deactivated andyou set the Minute Minder. Whenthe Minute Minder function ends,the display goes back to the nightbrightness.10.7 Cooling fanWhen the appliance operates, the cool-ing fan activates automatically to keepENGLISH 19