With some programmes turnover the food after 30minutes. The display shows areminder.10. USING THE ACCESSORIESWARNING!Refer to Safety chapters.10.1 Core temperature sensorThere are two temperatures to be set:the oven temperature and the coretemperature.The core temperature sensor measuresthe core temperature of the meat. Whenthe meat is at the set temperature, theappliance deactivates.CAUTION!Only use the coretemperature sensor suppliedor the correct replacementparts.The core temperature sensormust stay in the meat and inthe socket during the cooking.1. Activate the appliance.2. Put the tip of the core temperaturesensor into the centre of the meat.3. Put the plug of the core temperaturesensor into the socket at the front ofthe appliance.The display shows the core temperaturesensor symbol.4. Use the shuttle in less than 5 secondsto set the core temperature.5. Set the heating function and, ifnecessary, the oven temperature.The appliance calculates an approximateend time. The end time is different forthe different quantities of the food, theset oven temperatures (minimum 120 °C)and the operating modes. The appliancecalculates the end time in approximately30 minutes.6. To change the core temperature,press .When the meat is at the set coretemperature, an acoustic signal sounds.The appliance deactivates automatically.7. Touch a sensor field to stop thesignal.8. Remove the core temperature sensorplug from the socket and remove themeat from the oven.WARNING!The core temperature sensoris hot. There is a risk of burns.Be careful when you removethe tip and the plug of thecore temperature sensor.10.2 Inserting the accessoriesCAUTION!Do not use the baking tray ordeep pan with the function:Full Steam.Wire shelf:Push the shelf between the guide bars ofthe shelf support and make sure that thefeet point down.ENGLISH 17