AEG CKB6540ACM User Manual

Also see for CKB6540ACM: User manual

Contents

If the burner accidentallygoes out, turn the knob tothe off position and try tolight the burner again afterminimum 1 minute.The spark generator canstart automatically when youswitch on the mains, afterinstallation or a power cut. Itis normal.5.2 Burner overviewABCGF EDA. Burner capB. Burner crownC. SlotsD. ThermocoupleE. Ignition candleF. Burner bodyG. Hole for the ignition candle5.3 Replacing burner parts1. Put carefully the burner crown on theburner body. Let the crown fall freelyonto the body. Do not use force.Make sure that the hole in the crownis above the ignition candle.Make sure that the location pegs arein the slots in the burner body.Make sure that you can move thecrown a small distance from side toside.2. Put the burner cap centrally on top ofthe crown.Make sure that the cap is correctlyinstalled, with the enamel side upand you can move the cap from sideto side and front to back.3. Light the burner.If the burner does not ignite, adjust thecrown and cap again.5.4 Turning the burner offTo put the flame out, turn the knob tothe off position .WARNING!Always turn the flame downor switch it off before youremove the pans from theburner.5.5 Lid Safety DeviceLid has safety device, which cuts off thegas supply for the hob. Closing the lidactivates the safety device.WARNING!Always use the knob for thehob to switch off a burner.Do not use the lid as a cut-off device.ENGLISH 11