AEG CKB6540ACM User Manual

Also see for CKB6540ACM: User manual

Contents

4. Light one of the hob burners.To light the hob burner refer to the"Ignition of the hob burners".Check if the flame is regular.Check each of the burners.5. Turn the knob for the hob to the offposition.13.9 Checking the Lid SafetyDevice1. Lift the lid.2. Light one of the hob burners.To light the hob burner refer to the"Ignition of the hob burners".3. Close the lid. There should be no gassupply to the hob burners. Theburner goes out.4. Turn the knob to the off position andlift the lid. The gas supply should berestored to the hob burners, whenyou turn the knob on.13.10 Electrical installationWARNING!The manufacturer is notresponsible if you do notfollow the safety precautionsfrom Safety chapters.This appliance is supplied without a mainplug or a main cable.Applicable types of cables for differentphases:Phase Min. size cable1 3x6.0 mm²3 with neutral 5x1.5 mm²WARNING!The power cable must nottouch the part of theappliance shaded in theillustration.13.11 Covering terminal board• The recommended cross-section areais six square millimetres (6 mm²).• When you refit the mains terminalcover, make sure that the lower tabsare located inside the bottom edge ofthe aperture, before you fix the twoscrews into the top edge of the mainsterminal cover.• Make sure that the cover is securelyfastened.To open the cover ofterminal board obey theprocedure in oppositesequence.13.12 Terminal boardDo not remove blankingplates.Make sure that the links are fitted asshown.N N NLLENGLISH 29

/ 32

Related manuals for AEG CKB6540ACM