Spots or discolouration ofthe catalytic surface have noeffect on catalyticproperties.WARNING!Keep children away whenyou clean the oven at a hightemperature. The ovensurface becomes very hotand there is a risk of burns.CAUTION!Always turn the oven light onwhile using the catalyticcleaning (if applicable).Before activating thecatalytic cleaning remove allthe accessories from theoven.The walls with a catalytic coating are self-cleaning. They absorb fat which collectson the walls while the applianceoperates.To support the self-cleaning procedure,heat the empty oven on a regular basis.1. Clean the oven floor with warm waterand washing up liquid, then dry it.2. Set the oven temperature to 250 °Cand let the oven operate for 1 hour.3. When the appliance is cool, clean itwith a soft and moist sponge.11.4 Removing the shelfsupportsTo clean the oven, remove the shelfsupports.1. Pull the front of the shelf supportaway from the side wall.2. Pull the rear end of the shelf supportaway from the side wall and removeit.21Install the shelf supports in the oppositesequence.CAUTION!Make sure that the longerfixing wire is in the front. Theends of the two wires mustpoint to the rear. Incorrectinstallation can causedamage to the enamel.11.5 Removing and cleaningthe door glasses - top ovenThe door glass in yourproduct can be different intype and shape from theexamples you see in theimage. The number ofglasses can also be different.1. Open the door.2. Hold the door trim on the top edgeof the door at the two sides and pushinwards to release the clip seal.1213. Pull the door trim to the front toremove it.4. Remove the glass panels.www.aeg.com24