Configuring Groups41-001190-02 Rev. 01, Rel. 1.2 3-43Configuring Aastra IP Phone AccountsCreating Rules for Groups (Ring and Paging Groups)When you create a Group, you configure group-forwarding rules for the Groupthat determines what happens when an incoming call goes unanswered. Thefollowing table describes the parameters you can set to configure thesegroup-forwarding rules.Parameter DescriptionName Specifies the name of the Group. Valid values are:• Ring Group• Paging GroupExtension Specifies the extension for the Group.Note: For more information about assigningextension numbers, see the section, “VirtualExtension Numbers (for Ring and Paging Groups)”on page 42.Password (optional) Specifies the PIN access to a PagingGroup, or the password for voicemail on a RingGroup.Voicemail Notification(Not applicable to PagingGroups)Specifies whether or not an email is sent to the RingGroup to notify of a voicemail that was left by theincoming caller. Valid values are:• Off (default)• Email• Email with Audio-AttachmentNote: Ring groups do not have individual emailaddresses. When email is configured as thenotification method, the message is sent to the emailaddresses in the "My Preferences" of all members ofthat ring group (if configured).
