Team Functions Managing Calls in a Team87Using Direct-call Keysg Via direct-call keys you can only make calls to team and trunk keys pro-grammed with the same telephone number. No calls are signalled to direct-callkeys.4.1.3 Enquiry, Toggling and TransferFor information on how to use these functions, please also refer to the chapterentitled Enquiry, Toggling, Transfer and Conference starting on page 66.Within a team you can put a call on hold for enquiries or transfers. Calls on hold areindicated by the LED flashing slowly on your telephone.While the call is on hold you can make an enquiry call to another member in theteam and transfer the call.The following is a brief description of all call keys (trunk key, team key, busy keyand direct-call key).Enquiry CallsTogglingTransferringg Press the call key of the team member with whom you wantto consult. The original call is put on hold.g To toggle (i.e. switch back and forth between the two sub-scribers in the call), press the key of the held subscriber.G h Announce the call transfer to the other team member andput the handset on the hook. The call on hold is now trans-ferred to the other team member.
