Rev. Date: 16-Apr-15 Art: 714384-01F 22-19ADMINISTRATION TOOLSOverview This workspace is used to:• assign names to download locations,• assign instruments to locations,• configure the reporting and monitoring options for each instrument, and• set required download intervals for each location.The following sequence of tasks is used to set up the Central Data Station’smanagement function for instruments:1. Assign Location Names to Location Codes. Location Codes are thephysical port addresses for the download devices.2. Assign Instruments to Download Locations.Locations Edit Location NameThe location name can be changed from a letter/number code to the name of anursing unit, department, site, etc.. Up to 17 characters can be used to identifya location. Click Location Edit Location Name... in the menu or click Loc.Name in the toolbar.Note: Interface logic should be considered before editing. Add New Download Location AssignmentDownload locations can be added manually. Click Location Add DownloadLocation Assignment… in the menu or click the Add Assig. in the toolbar.Download locations will also be added automatically when a transmission isreceived from a download device with a location that is not already on the list.The name assigned is A_xx, where xx is the download device’s IP address orserial port. This name can be changed as described under Edit DownloadLocation Assignment.To assign instruments to a location without a download device, enter a LocationName or another descriptive word as the Location Code.INSTRUMENT AND LOCATION WORKSPACEOverview Administration Tools include Workspaces for Instruments and Locations,Operators, Database Maintenance, Inventory, Customization, and UserAdministration.
