2-20 Art: 714364-01O Rev. Date: 26-Feb-16Laser BarcodeScannerThe barcode scanner is used to scan barcode information into the analyzer.Parameters that can be entered into the analyzer via the scanner include: operatorand patient IDs, control and cartridge lot numbers, comment codes and patientchart data. The laser beam emerges from the recessed window on the front ofthe analyzer adjacent to the battery compartment. The laser beam automaticallyturns off after 3-4 seconds or after the barcode is successfully scanned.Laser Specifications The barcode scan engine is manufactured by Motorola Inc. or Opticon Inc. Thescan engine contains a laser diode that emits laser radiation at a frequency of650 nm. The scan engine outputs power (i.e., the power output of the engine ifremoved from this product) up to 1.9 mW in scanning mode. The scanner in thisproduct only operates when the Scan key is pressed. The scan engine is intendedto be used in a Class 2 device.Warning Labels Warning labels are shown below. The warning labels are located on the back orunder-side of the analyzer, as shown. The location of the laser window from wherethe analyzer emits the laser beam is also shown below.LASER BARCODE SCANNERLaser Barcode ScannerWindow
