7 - 3Art: 714369-01K Rev. Date: 06-Apr-15Squeeze cup lid to gainaccess to paper rollPaperPosition of paper roll in printerWhen removing a printout from the printer, pull the printout toward the frontof the printer and tear from one side to the other across the serrated edge.Using serrated edgeto tear paperSerrated Edge PaperPrinting Directlyfrom the AnalyzerBefore printing ensure that the printer is turned on. The printer is turned onand off using a switch on the left side of the printer. When the printer is onthe Power LED will be green.To print directly from the analyzer, point the analyzer’s Infrared CommunicationWindow at the printer’s IR LED window on its left side, ensure that the resultsto be printed are displayed, and press the Print key on the analyzer. The printermust be within 1 to 5in. (2.5 to 12.7cm) of the analyzer and must not be too closeto the analyzer. Do not move the analyzer or printer until printing is complete.Printing Via aDownloaderSee the Downloader Wiring and Programming section of this manual fordirections to connect the printer to a Downloader or Downloader/Recharger.Before printing ensure that the printer is turned on. The printer is turned onand off using a switch on the left side of the printer. When the printer is onthe Power LED will be green.Place the analyzer between the arms of the Downloader or in the Downloader/Recharger, ensure that the results to be printed are displayed, and press the Printkey. Do not move the analyzer or printer until printing is complete.
