Absolute Process Instruments API 1040 G Series Quick Start Manual

Absolute Process Instruments API 1040 G Series Quick Start Manual Manual pdf 1 page image

api-usa.com1220 American Way Libertyville, IL 60048Phone: 800-942-0315 Fax: 800-949-7502BSOLUTE ROCESS NSTRUMENTS, Inc.© 08-15Input: 0-100 mV to 200 VDC, 0-1 mA to 0-50 mADC, 4-20 mADCOutputs: One 8 Amp SPDT Relay, 0-1 V to ±10 VDC, 0-2 mA to 0-20 mADCO DC Input with Loop SupplyO Field Adjustable SetpointsO Plug-In Design for Fast InstallationO Input LoopTracker® and Alarm Status LEDsO Alarm Test, Optional Reset ButtonO Optional 0-1 V Setpoint Retransmission OutputQ Process Signal Retransmission with AlarmQ Alarm and Rescale a Process SignalModel Input Output PowerAPI 1040 GFactory ranged; specifymV, V, or mA rangeFactory ranged; specify mV, V, or mA range.One SPDT relay, HI alarm, normal acting.Specify alternate alarm configurations and options115 VACAPI 1040 G A230 230 VACAPI 1040 G P 85-265 VAC or 60-300 VDCAPI 1040 G D 9-30 VDCAPI 1040 G SPRFactory ranged; specifymV, V, or mA rangeFactory ranged; specify mV, V, or mA range.One SPDT relay, HI alarm, normal acting.0-1 V alarm setpoint retransmission.Specify alternate alarm configurations and options115 VACAPI 1040 G A230 SPR 230 VACAPI 1040 G P SPR 85-265 VAC or 60-300 VDCAPI 1040 G D SPR 9-30 VDCDC Input RangeFactory configured, please specify input rangeVoltage: 0-100 mVDC to 0-200 VDCBipolar voltage: ±100 mVDC to ±10 VDCCurrent: 0-1 mADC to 0-50 mADCInput Impedance and BurdenVoltage: 250 kΩ minimumCurrent: 50 Ω typical (1 VDC burden at 20 mA)Isolation and Input Protection750 VAC p or 750 VDC common mode protectionInput isolated from power supplyInput Loop Power Supply18 VDC unregulated, 25 mADC, <1.5 V p-p rippleMay be selectively wired for sinking or sourcing mA inputLoopTrackerVariable brightness LED indicates input loop level and statusDC Output RangeFactory configured, please specify output rangeVoltage: 0 to 1 VDC to ±10 VDCCurrent: 0 to 2 mA to 0 to 20 mA20 V compliance, 1000 Ω at 20 mAOutput CalibrationMulti-turn zero and span potentiometers, ±15% of span typ.Relay OutputOne SPDT form C contact setFactory configured alarm typeStandard: HI alarm, non-latching, normal actingOptions: LO alarm, latching, reverse actingRelay Contact Rating8 A @ 240 VAC resistive load or 30 VDC resistive load5 A @ 240 VAC inductive load (cos f = 0.4)3.5 A @ 30 VDC inductive load (L/R = 7ms)Caution: Do not exceed socket voltage ratingUse an RC snubber for inductive loadsSetpointOne 12 turn potentiometer, 0-100% of spanSPR option: 0-1 V output of alarm setpointDeadband1.0 to 100% of span, 12 turn potentiometerAlarm trip/reset window is symmetrical about the setpointOutput Test/Reset ButtonTest button toggles relay to opposite state when pressedHT option: Reset button resets latching relayAccuracy±0.1% of span (includes adjustment resolution and linearity)Response Time70 milliseconds typicalAmbient Temperature Range and Stability–10°C to +60°C operating ambientBetter than 0.02% of span per °C stabilityHousing and SocketsIP 40, requires installation in panel or enclosureAPI 011 or API 011 FS socketSocket mounts to 35 mm DIN rail or can be surface mountedPowerStandard: 115 VAC ±10%, 50/60 Hz, 2.5 W max.P option: 85-265 VAC 50/60 Hz, 60-300 VDC, 2.5 W typ.A230 option: 230 VAC ±10%, 50/60 Hz, 2.5 W max.D option: 9-30 VDC, 2.5 W typicalOptions—add to end of model numberL LO trip. Alarm trips on decreasing signal.HT Latching alarm with push button resetHP Latching alarm with power-off resetModule power must be turned off to reset alarmR Reverse-acting alarms. Relay coils energized in an alarmcondition. No alarm condition with module power off.U Conformal coating for moisture resistanceAccessories—order as a separate line itemAPI 011 11-pin socket, DIN rail or surface mountAPI 011 FS 11-pin finger safe socket, DIN rail or surface mountAPI CLP1 Module hold-down spring for high vibration ormobile applicationsDC Input Alarm Trips with Transmitter and Loop Supply API 1040 GApplicationsDescriptionThe API 1040 G alarm/transmitter accepts a DC voltage orcurrent input and provides both transmitter and alarm func-tions in one unit.The API 1040 G also provides a linearly-transferred DC voltageor current output. The API 1040 G transmitter output is usefulfor signal scaling, or translation from current to voltage or vice-versa in applications that do not require isolation.This module includes an unregulated 18 VDC loop excitationsupply that can be used to power an external loop-poweredtransmitter or other passive input device eliminating the needfor an additional DC loop supply.The API 1040 G provides a visual alarm indication and an SPDTalarm relay output when the input exceeds a high alarm trippoint or falls below a low alarm trip point.The alarm output can be factory configured for HI or LO opera-tion, non-latching or latching, normal or reverse acting. Top-accessible potentiometers are used to adjust the alarm setpointand deadband. Heavy-duty relay contacts allow the module todirectly control high capacity loads.Setpoint Retransmission OptionThe setpoint retransmission (SPR) option provides an analog0-1 VDC signal corresponding to the setpoint potentiometeradjustment. This allows remote monitoring of the alarm setting.LoopTracker and Alarm Status LEDsAPI exclusive features include a LoopTracker LED that varies inintensity with changes in the process input signal.A red/green bi-color alarm status LED visually indicate alarmstatus. These LEDs provide a quick visual picture of yourprocess at all times.Output Test/UnlatchAPI’s exclusive functional test button can be used to verify thealarm and system operation. The output test button greatlyaids in saving time during initial startup and/or troubleshooting.The HT latching option provides the additional function ofunlatching the alarm when the reset button is pressed. Thealarm will reset if the alarm condition not longer exists.API 1040 G P 001 001115 VACYour Required InputYour Required Output2.75"2.38"1.75"Deadband AdjustmentVariable Brightness Input LEDOutput Test ButtonOutput SpanOutput ZeroReset Button with HT OptionSetpoint AdjustmentBi-Color Relay LEDVariable Brightness Output LEDSwitching Current (A)Switching Voltage (V)0 3 5 10 30 50 100 300 50085310.50.30.1AC inductive load(cos f = 0.4) AC resistiveloadDC inductive load(L/R = 7 ms)DC resistiveloadRelay Contact RatingsFree FactoryI/O Setup!Quick Linkapi-usa.com/1040H H H H H HH H H H HH H H H H HH H H H HH H H H H HH H H H HH H H H H HH H H H HH H H H H HMade in USAHot SwappablePlug-In DesignAPI 011300 V RatingAPI 011 FS300 V Rating API CLP1

/ 2

Related manuals for Absolute Process Instruments API 1040 G