Absolute Process Instruments Cecomp F16ADA Instructions Manual

Absolute Process Instruments Cecomp F16ADA Instructions Manual Manual pdf 1 page image

Programmable Pressure Alarms F16ADABSOLUTE ROCESS NSTRUMENTS, Inc.api-usa.com 2011220 American Way Libertyville, IL 60048Phone: 800-942-0315 Fax: 800-949-7502© 02-09Ranges and Resolutionabs: Absolute reference (atmospheric pressure to zero at full vacuum)vac: Vacuum gauge, minus sign not used unless specifiedResolution is fixed as indicated in tableContact factory for engineering units not listedAccuracyIncludes linearity, hysteresis, repeatabilityStandard: ±0.25% of full scale ±1 least significant digitOptional: -HA ±0.1% FS ±1LSD (most ranges)CD Factory 5-point calibration dataNC NIST traceable test report and 5-point calibration dataDisplay4 readings per second nominal display update rate4 1/2 digit LCD, 0.5" H main display5 character 0.25" H alphanumeric lower display for units, functions, and setupBL models: Red LED backlight on whenever gauge is on.LCD Alarm 1 and Alarm 2 indicators and bi-color (red/green) LEDs on front panelControls and FunctionsSEL Select and display alarm trip pointsTEST Alarm acknowledge, or toggle alarm states when in test mode▲▲ Increase alarm setpoint when in setpoint adjust mode▼▼ Decrease alarm setpoint when in setpoint adjust modeCalibrationUser settable passcode required to enter calibration modeAll pressure and absolute models: zero, midpoint, spanAll vacuum models: –span, –midpoint, zeroVacuum/pressure models: –span, zero, +midpoint, +span±15 psi models: –span, –midpoint, zero, +midpoint, +spanAlarm Outputs and DeadbandDual form C (SPDT) relay contacts; 1A/24VDC, 0.5A/115VAC, non-inductive3 ft long 6-conductor 22 AWG cable with stripped and tinned wire endsAvailable configurations: HI/LO, HI/HI, LO/LO, normal or reverse acting120 milliseconds typical response timeHysteresis factory set at 1% of of full scalePowerGauge is on whenever power is applied. Designed for continuous operation.Any AC source of 8 to 24 VAC 50/60 Hz or any DC source of 9 to 32 VDC1.0 watt maximum power consumption3 ft long 2-conductor 22 AWG power cable with stripped and tinned wire endsOrder optional WMPSK 12 VDC wall mount power supply kit to operate on 115 VACEnvironmentalStorage temperature: –40 to 203°F (–40 to 95°C)Operating temperature: –4 to 185°F (–20 to 85°C)Compensated temperature: 32 to 158°F (0 to 70°C)●● Dual SPDT Alarms with Programmable Setpoints●● NEMA 4X and Display Backlighting Optional●● Bi-Color Red/Green Alarm LEDs●● Alarm Test FunctionSizeF16ADA: 3.38" W x 2.88" H x 1.65" D housingF16ADAN: 3.5" W x 3.0" H x 2.0" D housingAdd approximately 0.75" to height for pressure fittingAdd approximately 1" to depth for strain relief and wire clearanceWeightGauge: 9 ounces (approx.)Shipping wt.: 1 pound (approx.)HousingF16ADA: Extruded aluminum case, light gray epoxy powder coated, black ABS/ poly-carbonate bezel (gray aluminum bezel optional), front and rear gaskets,black/gold polycarbonate labelF16ADAN: Light gray ABS/polycarbonate NEMA 4X case, rear gasket, black/gold poly-carbonate labelPressure/Vacuum Connection Size and Material1/4 NPT maleAll wetted parts are 316 stainless steelOverpressure3000 psig range and metric equivalents: 5000 psig5000 psig range and metric equivalents: 7500 psigAll others 2 times sensor pressure112.5% out-of-range display: I – – – or I –.–.–.– depending on modelBurst Pressure4 times sensor pressure rating, or 10,000 psi, whichever is lessStandard F16ADA range units ref - alarmBacklit F16ADABL range units ref - alarmNEMA 4X F16ADAN range units ref - alarmBacklit + NEMA 4X F16ADANBL range units ref - alarmPressure/Vacuum RangeUnitsG=Gauge, A=Absolute, VAC=VacuumAlarm Options1N = Hi/Lo Normal action (Std) 1R = Hi/Lo Reverse action2N = Hi/Hi Normal action 2R = Hi/Hi Reverse action3N = Lo/Lo Normal action 3R = Lo/Lo Reverse actionExample: F16ADABL500PSIG-1NF16ADA with BL display backlighting, 500 psig, HI/LO normal action alarmsF16ADAPressureModels and Optionscecomp.com–30.0 inHg/15.0 psig 200.0 inHg abs 1600 mmHg 20.00 bar 2100 g/cm 2–30.0 inHg/100.0 psig 200.0 inHg 3200 mmHg 35.00 bar 1.000 kg/cm 2 abs–30.0 inHg/200.0 psig 50.00 oz/in 2 760.0 torr abs 70.00 bar 1.000 kg/cm 2 vac3.000 psig 80.0 oz/in 2 1600 torr abs 140.0 bar ±1.000 kg/cm 25.000 psig 240.0 oz/in 2 abs 2100 mmH2O 200.0 bar 1.000 kg/cm 215.00 psi abs 240.0 oz/in 2 vac 3500 mmH2O 350.0 bar 2.000 kg/cm 2 abs15.00 psig vac ±240.0 oz/in 2 210.0 cmH2O 20.00 kPa 2.000 kg/cm 2±15.00 psig 240.0 oz/in 2 350.0 cmH2O 35.00 kPa 4.000 kg/cm 215.00 psig 85.0 inH2O 1000 cmH2O 100.0 kPa abs 7.000 kg/cm 2 abs30.00 psi abs 140.0 inH 2O 2100 cmH2O 100.0 kPa vac 7.000 kg/cm 230.00 psig 400.0 inH 2O abs 200.0 mbar ±100.0 kPa 14.00 kg/cm 260.00 psig 400.0 inH 2O vac 350.0 mbar 100.0 kPa 20.00 kg/cm 2100.0 psi abs ±400 inH 2O 1000 mbar abs 200.0 kPa abs 35.00 kg/cm 2100.0 psig 400.0 inH 2O 1000 mbar vac 200.0 kPa 70.00 kg/cm 2200.0 psig 850 inH2O abs ±1000 mbar 400.0 kPa 140.0 kg/cm 2300.0 psig 850 inH2O 1000 mbar 700.0 kPa abs 200.0 kg/cm 2500.0 psig 7.000 ftH2O 2000 mbar abs –100 to 700 kPa 350.0 kg/cm 21000 psig 12.00 ftH2O 2000 mbar 700.0 kPa 1.000 atm abs2000 psig 35.00 ftH2O 4000 mbar 1500 kPa ±1.000 atm3000 psig 70.00 ftH2O 1.000 bar abs 2000 kPa 1.000 atm5000 psig 140.0 ftH2O 1.000 bar vac 3500 kPa 2.000 atm6.000 inHg 230.0 ftH2O ±1.000 bar 7000 kPa 4.000 atm10.00 inHg 480.0 ftH2O 1.000 bar 3.500 MPa 7.000 atm30.00 inHg abs 150.0 mmHg 2.000 bar abs 7.000 MPa 14.00 atm30.00 inHg vac 260.0 mmHg 2.000 bar 14.00 MPa 20.00 atm±30.00 inHg 760.0 mmHg abs 4.000 bar 20.00 MPa 35.00 atm30.00 inHg 760.0 mmHg vac 7.000 bar abs 35.00 MPa 70.00 atm60.00 inHg abs ±760 mmHg –1.00 to 7.00 bar 1000 g/cm 2 abs 135.0 atm60.00 inHg 760.0 mmHg 7.000 bar 1000 g/cm 2 200.0 atm120.0 inHg 1600 mmHg abs 14.00 bar 2100 g/cm 2 abs 340.0 atmUnit Abbreviationspsi = PSIinHg = INHGoz/in 2 = ZINinH 2O = INH2OftH 2O = FTH2OmmHg = MMHGtorr = TORRmmH2O = MMH2Okg/cm2 = KGCMg/cm 2 = GCMkPa = KPAMPa = MPAmbar = MBARbar = BARcmH 2O = CMH2Oatm = ATMF16ADAN

/ 2

Related manuals for Absolute Process Instruments Cecomp F16ADA